32 Blades Feeler Gauge Dual Marked Metric And Imperial Gap Measuring Tool For Guitar Bass Engineers To Measure Gap Width/thickness, Hardened Tempered

Multi-purpose: Widerange of applications: 32-blade plug gauges are widely used in industrial,automotive, mechanical, and hardware installation work as well as shop toolsetups such as tappet clearances, distributor points, bearing clearances,piston ring clearances, and thicknesses in hard-to-reach locations. 32blades Measuring Range: Measuringrange: 0.0015 inch/0.04 mm to 0.035 inch/0.88 mm Metricsizes (mm): 0.04, 0.05, 0.06, 0.08, 0.10, 0.13, 0.15, 0.18, 0.20, 0.23, 0.25,0.25, 0.28, 0.30, 0.33, 0.35, 0.38, 0.40, 0.43, 0.45, 0.48, 0.50, 0.53, 0.55,0.58, 0.60, 0.63, 0.65, 0.70, 0.75, 0.80, 0.88 Inchsizes: 0.0015, 0.002, 0.0025, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009,0.010, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019,0.020, 0.021, 0.022, 0.023, 0.024, 0.025, 0.026, 0.028, 0.030, 0.032, 0.035 Packageincludes: 1 xFeeler gauge WarmNotice: Thereis some anti-rust oil on the stainless steel feeler gauge to prevent it fromrusting; please don’t worry about that. 【Feeler gauge set】 Made of #65 manganese steel, each measuring feeler gauge has 32 blades of thickness. Suitable for measuring tappet clearance, spark plug clearance, bearing clearance, piston ring clearance, and so on. 【Easy identification】 dual standard metric and imperial stainless steel tool set measuring from 0.0015 inch to 0.035 inch (0.04 mm to 0.88 mm) The numbers of size are etched into the feeler gauge for easy identification. 【Inch sizes:】0.0015, 0.002, 0.0025, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020, 0.021, 0.022, 0.023, 0.024, 0.025, 0.026, 0.028, 0.030, 0.032, 0.035 【Metric sizes (mm)】 0.04, 0.05, 0.06, 0.08, 0.10, 0.13, 0.15, 0.18, 0.20, 0.23, 0.25, 0.25, 0.28, 0.30, 0.33, 0.35, 0.38, 0.40, 0.43, 0.45, 0.48, 0.50, 0.53, 0.55, 0.58, 0.60, 0.63, 0.65, 0.70, 0.75, 0.80, 0.88