Riiai DC 0-10V 0/4-20mA Current Voltage Signal Generator Built In Battery Power Supply Interface Analog Simulator Adjustable 4 Digit Display For Plc Panel Debugging Device Testing

Note: 1.l-MOOEis for testing only; 2. It is the sampling resistor of the device, not need to connect yourself. Clear Four-digit Display With clear 4-digit display, it is easy for you to read the current value and the voltage value. Save your time and improve your efficiency in work. Application It can be used for PLC and panel debugging, device testing, frequency converter, flow valve, etc. Packing List 1 x Signal Generator 1 x USB Cable 4 x Clip 4 x Insulation Clip Cover 1 x Screwdriver 6 x Terminal 1 x Manual Riiai Portable LED Display Signal Generator Specification: Material: ABS Battery Capacity: 1000mAh, 3.7V Maximum Charging Current: 0.8A External: Micro USB- 5V, Current: 0.2A (Not Charging)/1A (Charging) Voltage Output: -10v~+10v Adjustable, Accuracy after Calibration: 0.01V Current Output: 0-22mA Adjustable, Accuracy After Calibration: 0.01mA Current sampling resistance is not more than 500 ohms Encoder: 20 pulses per turn of the knob Power Supply: Built-in battery 1000mAh 【2-in-1 Voltage & Current Generator】 Voltage Output: -10V~+10V, precision is 0.01V, current output: 0-22mA, precision is 0.01mA, rotate the encoder knob to adjust the output voltage and current, switchable and adjustable, can be calibrated. The encoder knob rotates one circle and has 20 pulses 【Multiple 4-Digit Display】 With 4 different types of digit displays and two decimal points, you can press the Mode button to switch the display mode between voltage and current. 【Safe to Use】 Output range: passive or active 0-22 mA, -10~+10V, the voltage output can be exactly 0.00V; output range and precision are programmable and adjustable. Output with short circuit protection, power supply has reverse connection protection, which is safe for you to use. The user can set 9 x fast signal output points, making it more convenient to do debugging 【Wide Application】 It can be used for PLC and panel debugging, device testing, frequency converters, flow valves, servo motor speed regulation, light dimmers, etc.